- All Mode
- When ALL is selected as the volume to be infused
(VTBI), the entire contents of the syringe will be delivered
-
- Anesthesia Mode
- Allows the anesthesiologist to access additional drugs, in each profile,
that are appropriate to anesthesiology. It also features permanent pause.
-
- Auto Pressure
- When enabled and a pressure sensing disc is in use, the Auto Pressure
option is displayed in the Pressure Limit screen. Auto Pressure automatically
sets the alarm limit for a shorter time to alarm.
-
- AutoRestart
- AutoRestart minimizes patient-side occlusion alarms caused by momentary
kinking of tubing, IV pushes, etc.
-
- Back-Off
- Back-Off is only available when the administration set in use has
a pressure sensing disc. When enabled, the motor reverses plunger movement
during an occlusion until the pressure returns to preocclusion levels,
automatically reducing bolus flow.
-
- Battery Run Time Display
- The Battery Run Time Display appears on the Main Display prompt bar.
If enabled, this feature provides a visual display of the estimated
remaining battery run time under the current operating conditions, when
operating on battery.
-
- Bolus Dose
- A Bolus Dose can be programmed using either the Guardrails® Drug
Library or the drug calculation feature. A bolus infusion can be programmed
with or without a continuous infusion following the bolus.
-
- Channel Labels
- Channel labels provide a hospital-defined list of labels, displayed
in the Channel Message Display, and identifying the channel with the
solution being infused, the catheter location, or other helpful information.
-
- Delay Options
- The Delay Options feature allows the system to be programmed to delay
the start of an infusion a) for up to 120 minutes or
b) for a specific time up to 23 hours 59 minutes. A
callback for a programmed delay can be scheduled to give an alert Before
an infusion is to be initiated, After an infusion is
completed, Before and After an infusion, or no (None)
alert.
-
- Dose Checking
- The Always Dose Checking option causes a Guardrails® Soft Alert
to occur each time a dose limit is exceeded. The drug label on the
Main
Display provides an indicator that the infusion is beyond the current
Guardrails® Soft Limit. The Smart Dose Checking option causes
an initial Guardrails® Soft Alert to occur when a dose limit
is exceeded. Subsequent programming beyond the dose limit will not
receive an alert.
The drug label on the Main Display provides an indicator that the infusion
is beyond the current Guardrails® Soft Limit.
-
- Fast Start
- When Fast Start is enabled and an administration set having a pressure
sensing disc is used, the instrument runs at an increased rate when
an infusion is first started, taking-up any slack in the drive mechanism.
-
- Guardrails® Safety Software
- Designed to help prevent programming errors.
-
- Multidose Mode
- The Multidose Mode option allows 2-24 doses to be programmed at
equally spaced intervals on the same Pump or Medley™ Syringe
Module over a 24-hour period. This mode is designed to allow delivery
of multiple, equal doses
from the same container or syringe at regularly scheduled intervals.
- Patient ID
- An optional alphanumeric 16-character patient identifier can be entered
and displayed.
-
- Pole Clamp
- The Medley™ Point-of-Care Unit pole clamp adapts to
a wide variety of surfaces, to provide versatility. The pole clamp
features include
an ergonomically designed knob.
-
- Pressure Tracking
- The dynamic current pressure display is only available when the pressure
sensing disc is inserted.
-
- Profile
- Allows a unique set of system options to be configured to optimize
system function for a specific hospital area or patient type.
- Medley™ Point-of-Care Unit
- The core of the Medley™ Medication Safety System. Enables infusion
programming and monitoring on up to four attached channels.
-
- Tamper Resist
- A feature that provides a quick one-touch lockout of the front panel
keypad.
|
